When the tires on your kids ride on car wear out, it’s time to replace them. When you have the correct equipment and tires, replacing Power Wheels tires is straightforward.
Parents wish to replace worn-out tires with new ones or replace plastic tires with rubber tires.
The old tires must be unscrewed, removed, and the new tires installed. To replace the tires on your kids ride on cars, you don’t need any specific abilities.
You already have a rough notion of how to change a flat tire if you’ve ever done it before. Power wheels, on the other hand, have a few unique features that make changing tires a little different from changing a flat tire.
The Replacement’s Preparation
It’s recommended to begin by looking for replacement wheels for the ride on car from a trusted supplier. New tires can be purchased from trustworthy retailers such as Amazon.
Make sure the kids car you choose is compatible with the Power Wheels model you have at home.
The front wheels of some kids electric cars are smaller, while the rear wheels are larger. Before purchasing any replacement wheels online, read the product description thoroughly.
Check to see if the products will include new hubcaps or retainers, which would be a nice extra.
How to Change the Tires on Power Wheels
Because of the materials and sizes, ride on cars tires are installed differently than those on regular cars. In a few simple steps, you can replace the tires on your kids toy car without the assistance of a handyman.
For this task, you’ll need a hammer and a flat-faced screwdriver. In the process, you can also clean the axle and the vehicle’s underside.
A step-by-step tutorial on replacing power wheels tires can be found here.
Step 1 Select a Workspace
To work on the toy car, you’ll need to find a location with enough space. You can choose between a working table and a level surface on the ground.
To make things easier, park the vehicle, tools, and spare tires in the work area.
Step 2 Raise the Ride On Toy Car to a higher level
You can choose to stand the ride on car upright in the back so that all four wheels are accessible. To avoid the vehicle from falling and injuring other pieces, make sure it is stable.
Alternatively, you can lift the kids electric car off the ground with a tiny jolt. To avoid shattering the plastic parts, be careful when hooking up the automobile jerk under the vehicle.
Step 3 Loosen the Retainers and Hubcaps
You can start removing the retention caps once the automobile is well lifted. To remove the retainer cap, slide the flat edge of a screwdriver between the hubcap and the retainer cap.
It takes a lot of effort to get rid of some of them. Remove the retainers and hubcaps by repeating the process.
In power wheels, all of these elements serve as the tire’s rim. The majority of the parts are white, however, there are a few that are black.
Step 4 Remove the Old Tires
Remove the tire and do the same with the other three tires. You put the old tires somewhere where they won’t get mixed up with the new ones.
You have the option of wiping the axles clean with a wet towel or washing them with soap and water.
Step 5 Switch out one of the tires
Attach one of the new tires to one of the front wheel spaces. Install a hubcap after the wheel is in place.
You can put it into position with your hands. If you’re going to use a hammer, use light pressure to avoid shattering the plastic parts.
Install the new retainers to keep the hubcap in place after that. If you have a hammer, it will be easier to install the retainer, but remember to use moderate power while hitting the push nut. Finally, put the retainer caps on to finish the job.
Step 6 Replace the Tires That Haven’t Been Replaced
Step five should be repeated with the remaining three replacement ride on cars tires.
Step 7 Take a test drive
When the ride on car is on the ground, check to see if the wheels are wobbling. It would also be beneficial if you asked your child to drive the toy car while you were watching to make sure the wheels were rotating properly.
When you have all of the supplies, replacing power wheels tires should take 30-60 minutes. When it comes to the plastic parts that can shatter, use light to moderate force.
Ensure that all of the pieces are securely fastened to prevent the wheels from coming off while your youngster is driving.
How to Repair 12v 24V Ride On Cars Tires That Have Cracked
It’s futile to acquire replacement power wheels tires if the ride on toy car just has one cracked tire. To fix fractured tires and give kids car tires a few more months before replacing them, employ a few DIY tips.
First, use glue or fiberglass to fill in the cracks. Extra hold glue and a fiberglass kit can be found at your local hardware store or online.
Bonding the fractured regions makes the site stronger and less likely for the cracks to develop larger.
After you’ve fixed the cracks, apply spray rubber to seal the wheels and keep them in good working order. Flex Seal Spray can be used to cover ride on car tires with a traction-enhancing rubber coating.
The seal will lessen the amount of wear and tear that the plastic wheels experience as a result of regular use. When you see that the rubber spray has worn off, it is better to reapply it.
Is it Possible to Find Low-Cost Kids Ride On Car Tires?
Yes. There are independent companies that make Power Wheels tires at a reasonable price. The tires, on the other hand, will not serve your child as well as OEM replacement wheels.
Paying the full amount for replacement tires from Fisher-Price is worthwhile because you can acquire a replacement in the event of damage.
The tires also contain the precise requirements that the ride on car requires to perform properly. Choosing tires with the wrong wiring specs can cause the toy car’s motor to overheat and become unbalanced.
If this happens to you, it’s time to upgrade your motor.
Learning how to replace ride on cars tires is simple and may be done as a do-it-yourself activity. It is not necessary for parents to take their kids toy cars to the garage to get the tires replaced.
Furthermore, the replacement operation does not necessitate a large number of tools. If you don’t have a toolbox, you can borrow any from your neighbors.
You might be interested in: