Power wheel toys for kids are a great way to bring your kids outside for some sunshine and fresh air. They’re a blast to drive and will keep you entertained for hours! However, rainy weather can put a damper on proceedings, and your ride-on car may get wet.
Everything you need to know about kids power wheels and wet weather is covered in this guide. Let’s learn how to store a kids ride-on car and repair a water-damaged power wheel in the article below.
Can I leave kids power wheels in the rain and get wet?
No, children who travel in power wheel should not get wet. Kids cars may be left outside for brief periods of time while in use, but they should never be left unattended in wet weather.
If water enters inside the kids power wheel, it can rust the electrical components, leaving your kids without a car toy to play with! It’s better to keep your ride-on car indoors if it’s raining or snowing outside.
It’s legal to leave your power wheel toys in the rain as long as it’s not a regular occurrence. Because the majority of kids car toys have enclosed battery compartments with thick plastic pieces to safeguard them, this is the case.
The power wheel for kids, on the other hand, isn’t completely waterproof. Flooding and strong rain can quickly reach the internal electronic components of a kids power wheel, causing them to fail.
While removing the batteries from a kids electric car can help prevent water damage, excessive humidity can cause the wiring beneath and inside the car toy to mold, short-circuit, or fail. As a result, you should probably avoid driving your ride on car in the weather.
Is it suitable to leave ride-on cars outside?
Leaving your kids power wheel outside is not a good idea. We don’t recommend it, and neither do a number of other manufacturers. It’s possible that an electric automobile will continue to work after being left out in the rain. However, after a while, the battery is likely to fail. If water gets into the battery, you can have a very unhappy toddler on your hands!
If you must store your power wheels outside for whatever reason, ensure sure it is protected with a high-quality waterproof cover and the battery is kept inside.
On a moderate, bright day, there’s usually no harm in leaving your ride on cars vehicle outside. UV damage can be reduced by parking the toy car in a shaded area, and the battery can be kept from overheating.
Nonetheless, it is always preferable to keep your kids power wheels inside. You don’t have to make room in your living room for your child’s toy car. However, you may want to set aside a small space for the car toy in your garage, on your front porch, or on your back patio.
Where to keep your ride on power wheel?
Consider where you can store an electric car for kids at home before purchasing one. Make sure it stays dry, and choose a location with enough space to suit the car toy. Indoors is usually the best place to keep your power wheels. This may be in a spare room, your basement (if it’s dry), or your garage.
If you’re storing your power wheel in the garage, ensure sure the area is well ventilated. It’s tempting to just push the ride-on car in and leave it, but it doesn’t take much to cover it in gardening tools and other power wheels. Installing storage racks is a wonderful idea because you can park the car on them and keep it off the ground.
It’s not a good idea to leave your kids car outside. If you must store the automobile outside, make sure to use a waterproof protective cover. It’s a good idea to keep the battery indoors to keep it safe from the cold and rain.
You could store the kids power wheel outside if you’re willing to create a modest garage or shelter for it. It’s important to note, however, that partially open shelters and hutches are still vulnerable to environmental hazards.
What is the best way to clean a power wheel without causing damage?
Cleaning your ride-on car is simple, and you can do it with your kids to show them how to properly care for their car toys! To ensure that the power wheels are safe to use, you should clean them on a regular basis.
Remove any debris or objects from the kids car and unplug it from the charger before you begin. Debris and dirt can accumulate in the foot pack and under the trunk, so check these areas often. To avoid water getting into the components or battery, you should wash your kids car carefully.
Wipe the power wheel down with a moist towel for the best results. To clean your vehicle, soak your cloth in a bucket of warm water with dish soap, ring it out, and wipe it down. After that, go over the car again with a damp towel dipped in freshwater.
What should you do if your power wheel won’t start after it’s been soaked?
When your kids power wheel stops operating, it can be concerning, especially if it has been damp. But there’s no need to be concerned! You can perform a few tests to determine if the problems can be resolved.
The first step is to remove the battery safely. Make sure the battery is completely dry and free of any moisture. Charge the battery completely with your charger. Place it back into the car once it has been charged, and it should start up. If not, you may need to conduct additional research.
While your kids ride on truck may not break down right away after a day in the rain, it’s important to remember that these toys aren’t meant to be kept outside permanently. The internal components of a power wheel toy, including the battery and wiring, can be damaged by constant rain and sun.
Excess moisture can also encourage mold growth in the plastic and fabric parts of a kids electric car. Always store your power wheel toys underground in a protected spot to keep your youngster safe from moldy seats, moist flooring, and electrical short-circuiting.
You might be interested in: