Power wheel tires are prone to wear and tear, and there is typically little you can do to prevent it. When exposed to the environment, plastic will deteriorate over time. Ride on car tires are normally composed of tough plastic and can withstand a lot of abuse, so rather than buying a new set every time, you can try to fix them yourself.
However, depending on the extent of the damage, you may need to replace the kids power wheel tire. Finding cracks and holes in your kids car can be aggravating, especially when you consider how expensive the toy was to begin with. Thankfully, there are some options for repairing the tire before replacing it. Continue reading to learn how to fix your kids power wheel tires.
Repairing a damaged or cracked power wheel tire
Plastic tires are standard on all new power wheel, and they are designed to handle a wide range of driving situations while supporting the driver’s weight.
Unfortunately, these plastic tires are not long-lasting, and because they spin a lot on snow, dirt, and grass, they wear out quickly. Without traction to help the toy car navigate smooth surfaces, the rate of wear and tear accelerates, potentially leading to tire breaking.
Our children are rash drivers, and the fact that they enjoy exploring new routes in their ride on cars can lead to collisions that shatter one of the tires.
Because it is dangerous to ride a toy power wheel with a cracked tire, you may need to replace or repair it. Regrettably, replacing all of the wheels can be extremely expensive.
As a result, you must address the crack as soon as it occurs in order to prevent it from spreading. If the tire has lost traction, you must first repair the crack before attempting to improve its traction. Fortunately, there are a few simple techniques for repairing damaged wheels.
The cracked kids car tire must be removed
Begin by elevating the kids car in your workspace so that the four wheels are easily accessible. Before continuing, double-check that the power wheel is stable. Alternatively, you can lift the damaged tire with a tiny jerk.
Remove the retainer cap on the cracked tire after the ride on car is lifted. To lift and remove the retainer cap, insert your flat-edged screwdriver between it and the hubcap.
Because some retainer caps are difficult to remove, you should be patient when doing so.
After removing the retainer cap, loosen the retainer nut with a screwdriver and remove it. If any of the tires have lost grip, this is a good moment to increase their traction while the damaged tire is being repaired.
Remove the damaged tire and clean it
After removing the tire, wash it well to eliminate any soil or dirt particles stuck in the nooks and recesses. Next, in a large bowl, wash the tire with water and soap.
Dish soap will aid in the removal of dirt from the tire. Then, using a toothbrush, reach the grooves and make sure they’re clean before proceeding with the repair.
Repair the worn-out power wheel tire
If the tire was also lacking in traction, you should sand it down to produce an adhesive surface before washing it. Then, by repairing the break, the traction coating you apply will be able to serve your child for a long time.
Fortunately, there are a few methods for repairing a damaged tire that will restore your child’s power wheel tire to its original condition. Fiberglass kits or duct tape are the most popular solutions for dealing with a cracked tire.
Before cleaning the tire, sand it down to create an adhesive surface. The traction coating that you will apply will then be able to serve your child for a long time once the crack has been repaired.
Fortunately, there are a few techniques for repairing a damaged tire that will restore your kids electric car tire to its original condition. Fiberglass kits and duct tape are the most common ways of repairing a broken tire.
Replace the tire that has been repaired
After the glue has cured and the crack has been repaired, attach it to the axle of the automobile and tighten the retainer nut before replacing the retainer cap.
After that, remove the jerk or lower the kids car to the ground, and check to see if the tire is wobbling while driving. It would be beneficial if you could have your child drive the power wheel toy and then inspect the tire to ensure that it is in good condition and not wobbling.
Comparison of rubber and plastic tires for power wheel
Kids ride on car tires are simple to repair, but they will need to be replaced over time, depending on the terrain and temperature. Replace your tires for the power wheel with rubber ones, which will last considerably longer than the default plastic ones.
Rubber tires are still very inexpensive, but they will last longer. You can buy something like a Skid Surf if the ride on toy wheel well/inner fender provides enough space. This can be connected with the above-mentioned sealants and will help to keep the plastic tire together. It will also aid in the creation of a more attractive and durable surface.
Is it possible to swap out the tires?
If the crack is too large, it may be necessary to replace it. If that’s the case, I’m sure you’re thinking if the tires can be swapped out, especially since you already have a broken-down power wheel in your garage.
The answer is no; each toy car has its own set of tires. As a result, if the model isn’t the same, you could have to buy a complete set of tires.
The plastic tires are not very durable, so they will wear out quickly and, in the worst-case situation, crack. Rather than buying a new tire due to a little break, you can patch it with duct tape or a fiberglass kit.
It takes very little time and effort to repair your kids power wheel tires. Your child won’t be able to tell the difference, and it won’t cost you a fortune.
If your factory kids cars tires continue to break or are beyond repair, you may easily purchase a replacement made of plastic or rubber for a very low price online.
You might be interested in: